Sungold Power 5000W 48V Solar Charger Inverter (Parallel 100 MPPT Version) - FREE SHIPPING
Sungold Power 5000W 48V Solar Charger Inverter (Parallel 100 MPPT Version) - FREE SHIPPING
FREE SHIPPING!
All-in-one solar hybrid inverter: 5000 Watt Pure Sine Wave Inverter combined with Max 100A MPPT or 80A MPPT solar charging (SOLAR+AC), Max 5500W 500V PV Array. It combines the functionality of a grid-tied and off-grid system together.
SPH5048P Parallel Kit: Parallel 6 units up to 30kW power output. You will get 120V single phase, 120V/240V split phase capability (more than 2 units in parallel), and 208V 3-phase support (more than 3 units in parallel). Increases the inverter power and surge capacity.
Stable AC output: 5000 Watt Pure Sine Wave 110V AC output, loaded motor capacity 4HP and overload protected. It can power various household and office loads such as refrigerators, computers, televisions, ovens, air conditioners, and more.
Four charging modes and 4 output modes: AC Priority / Solar Priority / Only Solar / Mains & Solar hybrid charging. 4 output modes: PV priority / Utility priority / Inverter priority / Hybrid output and grid connection to meet your different requirements.
Battery type: 48V AGM/Sealed, Gel, Flooded, Lithium batteries, and a User Mode for custom inputs to work with virtually all battery types. Battery Charging Voltage Range: 40–60V. Includes an RS485 port for BMS communication.
Technical Specifications
Technical Specifications
General Information
Model: SPH5048P
Type: All-In-One Solar Hybrid Inverter
Rated Power: 5000W (5kW) Pure Sine Wave
System Type: Hybrid (Grid-Tied + Off-Grid)
Nominal Battery Voltage: 48V DC
Inverter Specifications
AC Output Voltage: 110V AC (Single Phase)
Output Power: 5000W continuous
Surge Power: Up to 2x rated power (varies by configuration)
Waveform: Pure Sine Wave
Frequency: 50Hz / 60Hz (Auto-sensing or selectable)
Power Factor: 1.0
Efficiency: ≥93%
Overload Protection: Yes
Motor Load Capacity: Up to 4HP
Solar (PV) Input
Maximum PV Array Power: 5500W
MPPT Solar Charger: 80A or 100A (model dependent)
MPPT Voltage Range: 120V – 450V DC
Maximum PV Input Voltage: 500V DC
Number of MPPT Trackers: 1
PV + AC Charging: Supported
Battery Charging
Battery Type Support: AGM / Sealed / Gel / Flooded / Lithium / User-defined
Battery Voltage Range: 40V – 60V DC
Maximum Charging Current (Solar + AC): Up to 100A
Charging Modes: AC Priority, Solar Priority, Only Solar, Mains & Solar Hybrid
Communication Port: RS485 (for BMS / Lithium battery communication)
System Modes
Output Modes: PV Priority, Utility Priority, Inverter Priority, Hybrid Output
System Functionality: Grid-tied operation with backup, Off-grid standalone operation, Hybrid (solar + grid + battery)
Parallel & Phase Operation
Parallel Capability: Up to 6 units (30kW total)
Supported Configurations: 120V Single Phase (1–2 units), 120V/240V Split Phase (2+ units), 208V 3-Phase (3+ units)
Parallel Kit Required: SPH5048P Parallel Kit
Protection Features
Overload / Short Circuit Protection
Battery Overcharge / Low Voltage Protection
PV Overvoltage Protection
Overtemperature Protection
Reverse Polarity Protection
Physical & Environmental
Cooling: Intelligent fan cooling
Operating Temperature: -10°C to +50°C
Storage Temperature: -15°C to +60°C
Humidity: 5% – 95% (non-condensing)
Noise Level: <60 dB
Enclosure Rating: Indoor use (IP20 / optional higher protection available)
Dimensions: [Insert dimensions if available]
Weight: [Insert weight if available]
Certifications & Compliance
Standards: CE, RoHS, ISO9001, and other applicable safety standards
Warranty
Warranty
Shipping & Returns
Shipping & Returns
Share
